LG TV remotes are good all-around usability, but lately, people often ask how to fix LG remote. Sometimes the problem is easy to solve at home, but sometimes you have to go to a service center to solve this problem. However, if you don’t want to waste money and want to try fixing the LG remote at home, then this article is for you.
Why LG TV remote isn’t working?
There can be a wide range of reasons why the LG remote does not work, but the most common problems are:
- You didn’t pair your LG Magic remote
- Your remote may be empty
- There could be a software malfunction.
You can solve most of these problems at home, so you don’t have to pay a service center.
How to pair your LG Magic remote
If you have a new LG Magic remote, you just need to pair it to your TV.
To do this do the following:
Turn the TV on and turn off another remotely supported technique to avoid interference, then take the Magic Remote and hold it near the TV. Then hold the MUTE or OK button for 10 seconds until the message appears on the TV screen that your TV Magic Remote was connected.
After that, try using LG Magic Remote.
How to check if your LG Magic remote is discharged
If your LG remote has stopped working, the problem may be that it has run out of power. In this case, you need to do the following:
- Open the back cover of the LG remote
- Replace the batteries with new ones.
- Close the cover.
Check if your LG remote is working.
How to fix LG remote software lag
Sometimes the LG remote may not work because of software lag. This problem can also be solved at home, so you don’t need to go to a service center.
To fix this problem, you need to disconnect your LG Magic remote and connect it once again.
To do this, press the two BACK and HOME buttons on the remote at the same time. Hold buttons for 10 seconds and your remote will be disconnected.
Then turn the TV on and take the Magic Remote and hold it near the TV. Then hold the MUTE or OK button for 10 seconds until the message appears on the TV screen that your TV Magic Remote was connected.